BMW inpa_2


download USB2.0 FTDI driver

INPA/EDIABAS, GT1, SSS. (Diagnose, coding / programming).
Complete support of all blocks of management on all models BMW since 1998!
Supports reports:
1. High-speed D-CAN and PT-CAN (500 kbit/s)
2. Low – speed K-CAN (100 kbit/s)
3. Standard BMW reports (BMW-OBD-interface).
D-CAN It is used for diagnostics of the following models:
– E60, E61 since 03/2007
– E83 since 09/2006
– E81, E87 since 03/2007
– E90, E91, E92, E93 since 03/2007
– E70 (new X5)
– R56 (new MINI)
PT-CAN And K-CAN it is applied:
For work with blocks of management ? on a table ? without the automobile.
Standard BMW-OBD-interface it is used for diagnostics:
With 1995 for 1998 (except for old blocks of management using L-line).
With 1998 for 03/2007 years on all models.

1、copy inpa all file to c:\.
2、edit system path ,add c:\ediabas\bin\ path(syspath.jpg)
3、Connect USB cable and instal FTDI drivers.
4、install d-can usb device(USB2.0 FTDI driver.rar)
5、Record your COM port number (number.jpg)
6、Setup “Latensy Timer = 1” (L_timer.jpg)
7、Set c:\ediabas\hardware\obd\obd.ini PORT=comX (your USB-COM port number)
8. Run c:\ediabas\hardware\obd\OBDSetup.exe
9. Restart Windows
10、change to c:\ediabas\bin\EDIABAS.ini Port= 6801
inpa c:\inpa\bin\INPALOAD.EXE

Frequently Asked Questions about EDIABAS, INPA and the Tool Set
Version 1.09, dowload this PDF now INPA FAQ

Comments are closed.