XBOX360 wireless card manual

xbox 360 wireless adapter

XBOX360 wireless card manual

Xbox 360 Wireless Network Adapter

– Only used in the Xbox 360
– To provide wireless broadband network, wireless network card to connect to Connect Xbox Live or another one Xbox 360
– Use the host USB port power and communications
– The use of 2.4GHz, 5GHz dual-band signal
– Use the 802.11a/b/g wireless network protocol for civilian
– Integrated wireless networking technology, will not conflict with Xbox 360 Wireless Controller

Install a wireless network adapter

Xbox 360 Wireless Network Adapter is designed to be mounted directly on the host on the rear panel. Remember not to use the adapter itself or the antenna to bring the host.

Set up a wireless network connection

If you know your wireless network settings, it is easy for the Xbox 360 wireless network adapter, or join a new wireless network

Start your host and any wireless network devices
The back panel in the host adapter you installed, USB connector into USB slot
Host menu interface into the system pages, set network parameters
After setting correct exit page, the host with the existing wireless network to establish the connection
With another one host adapter is also installed to establish a direct wireless connection
The adapter on the two prominent fragments were embedded in the host near the rear panel USB interface, two small slots

The USB connector into the adapter next to the rear panel USB host port, if the host network cable network cable to connect the port with the need to pull out the
Put up an antenna adapter. Antenna only a flat spin, do not try to reverse the

Tags: ,

Comments are closed.